|
Availability: In Stock
Digium TE210P Dual T1/E1/J1 Scaleable PCI Interface Card
The TE210P is part of the newer generation of Digium hardware designed to improve performance
and scalability through bus mastering architecture. The Digium TE210P supports E1, T1,
and J1 environments - selectable on a per-card or per-port basis. This allows signaling translation between E1, T1, J1 equipment and allows inexpensive
T1/J1 channel banks to connect with E1 circuits. Because the TE210P improves I/O
speed by up to 10 times, the result is lower CPU usage and increased card density
per server.
Digium has designed the TE210P to be fully compatible with existing
applications and it is fully integrated with the Asterisk PBX/IVR. The open source driver also supports an API interface for custom
application development.
The TE210P supports industry standard telephony and data protocols, including
Primary Rate ISDN (both N. American and Standard Euro) protocol families for
voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side
interfaces are supported, also included are advanced call features.
The TE210P supports a 3.3v PCI slot only - typically available on newer motherboards
and in 64-bit PCI bus architectures. The TE205P is for use only with a 5.0 volt
PCI slot.
Data Modes:
Cisco HDLC
HDLC
PPP
Multilink PPP
Frame Relay
Voice Modes:
PRI CPE & PRI NET
- NI1
- NI2
- EuroISDN
- 4ESS (AT&T)
- 5ESS (Lucent)
- DMS100
E&M
- Wink
- Feature Group B
- Feature Group D
FXO & FXS
- Ground Start
- Loop Start
- Loop Start with Disconnect Detect
|
