Physical Interfaces/Controls

• 44 10/100/1000BaseT Ethernet Ports (RJ-45 IEEE 802.3/3u/ab)
• 4 Selectable Ports (Nos. 45-48), use as either: 10/100/1000BaseT (Gigabit) Ethernet or SFP (802.3z
• 2 SFP Ports (100mbps / 1gbps)
• Console Port (RJ-45 physical, RS-232 electrical)

PoE Specification

• 44-ports 802.3af & 802.3at (High Power) PoE PSE
• 405 Watts Total Power Budget for PoE
• Auto Detection of Powered Device (PD) and Consumption Levels
• Per Port PoE Status LED Indicators
• Alert LED for high PoE Usage
• Port Power Consumption Monitoring via Web Interface & CLI
• PoE PD Scheduling (per port)
• PoE PD Priority (per port)
• PoE PD Status / Ping monitoring - restart PoE PD port on no connectivity (per port)
• Circuit Protection to Prevent Power Interference between Ports

VLAN

• 802.1q Tag-based VLAN
• Port-based and MAC-based VLANs
• QinQ (Basic)
• GVRP
• Up to 4K VLANs (out of 4096 VLAN IDs)
• 802.1v Protocol-Based VLAN
• Voice VLAN (OUI Mode)
• Surveillance VLAN (OUI Mode)
• Protocol VLAN
• MAC-based VLAN
• Management VLAN

QoS

• Support 8 priority queues
• Port-Based rate control
• Priority queue schedule (WRR or Strict Priority
• Class of Service: 802.1p CoS SFP (802.3z) , DSCP, CoS-DSCP, IP Precedence (ToS)
• Rate Limit

Network Security

• Access Control Lists (ACL): Up to 512 ACL Entries, Source and destination MAC,VLAN ID, IPv4/v6 address, Protocol, TCP/UDP port
• IP Source Guard
• Storm Control (Broadcast, Unknown Multicast, Unknown Unicast)
• DoS Attack protection
• AAA Authentication
• MAC Authentication
• Protected Port / Port Isolation
• Static Port Security
• Dynamic ARP Inspection
• DHCP Snooping with Option 82
• Loop Detection & Prevention

Spanning Tree

• Spanning Tree Protocol
• Rapid Spanning Tree Protoco
• Multiple Spanning Tree Protocol

Link Aggregation

• Combine multiple ports to increase bandwidth
• 16 Aggregation Groups
• Up to 8 ports in each group
• LACP or Static setup
• Supports traffic load balancing

Networking Performance

• Switching Capacity: 100Gbps
• Forwarding Rate: 74.4Mpps
• MAC Addresses Supported: 16K
• Jumbo Frames up to 12KB
• Packet Buffer size: 12M

Multicast

• Up to 256 multicast groups
• IGMP Snooping V2/V3 (BISS)
• IGMP V2/V3 Querier
• MLD Snooping V1/V2
• Multicast VLAN registration

AAA

• 802.1x – Single / Multiple: Port based, Mac Based
• Guest VLAN
• RADIUS / TACACS+ Authentication for Management

Management

• IPv4 & IPv6 Dual-Stack
• LLDP(802.1ab) + MED
• Web User Interface (HTTP or HTTPS)
• Firmware Upgrade/Backup by HTTP/HTTPS
• HTTP (Non-TLS) can be disabled for increased security
• Configuration Backup/Restore
• Factory Default
• System Reboot
• Dual Firmware Image (Active & Backup Firmware)
• Command Line Interface (CLI) via SSH/Telnet
• Console Port (RJ45) for CLI management
• DrayTek Switch Management support via router (requires router firmware support)
• VigorACS Compatible (TR-069)
• SNMP v1, v2c, v3 (with Generic Traps)
• RMON Groups 1, 2, 3, 9 (History, Statistics, Alarms, Events)
• SNTP (Simple Network Time Protocol)

Diagnostics

• Port Status & Usage display
• PoE active display
• CPU/RAM Usage display
• Event Log via Syslog
• Port Mirroring
• Ping
• Port-based Cable Test

Hardware Monitor

• Remote Monitoring through VigorACS & Web Interface
• Data Recording & Graphing
• Supports Email & LED alert on Fan failure
• Temperature Monitoring
• Voltage Monitoring
• Fan Control
• Fan Test Mode
• Power Saving Mode

Hardware Monitor

• Remote Monitoring through VigorACS & Web Interface
• Data Recording & Graphing
• Supports Email & LED alert on Fan failure
• Temperature Monitoring
• Voltage Monitoring
• Fan Control
• Fan Test Mode
• Power Saving Mode

IPv4 Features

• DHCP
• DNS Client

IPv6 Features

• Auto Configuration
• Static IPv6 Address & Prefix Length
• Static IPv6 Default Gateway
• IPv6 Neighbour Discovery (ND)
• IPv6 Duplicate Address Detection
• ICMPv6
• DHCPv6 Client

General IEEE Standards Compliance

• 802.3 10Base-T
• 802.3u 100Base-T
• 802.3ab 1000Base-T
• 802.3x Flow Control Capability
• 802.3 Auto-negotiation
• 802.1Q VLAN
• 802.1p Class of Service
• 802.1d Spanning Tree
• 802.1w Rapid Spanning Tree
• 802.1s Multiple Spanning Tree
• 802.1x Port Based Network Access Control
• 802.1ab Link Layer Discovery Protocol (LLDP)
• 802.3ad Port trunk with LACP
• 802.3az Energy Efficient Ethernet
• 802.3af PoE
• 802.3at PoE+

Operating Requirements

• Power Input Requirements: 220-240VAC
• Power supply: Internal
• Maximum Input Power Consumption: 453.3 Watts
• Operating Temperature:~0 °C to ~45 °C
• Storage Temperature:-20 °C to ~70 °C
• Operating Humidity: 10% to 90% RH (non-condensing)

Physical Specifications

• Dimensions: 441 x 330 x 45 mm (W x D x H)
• Rack mountable: 1U
• Brackets included for rack or wall mounting
• Weight: 6.75Kg (excluding SFP modules/cables)