CD ROM |
Previous Top Next |
To install the system using the CD ROM do the following:
| 1. | Insert the CD into system's CD ROM drive(download and burn the image from 'http://pw-updates.bicomsystems.com:8080/pbxware.iso' in case you have no disk at hand) |
| 2. | Boot up the system |
| 3. | Press "Enter" on boot up screen |
| 4. | The System will be installed and rebooted . A boot message "Starting Installation" will show on reboot. This process may take few minutes. Please be patient. Once the installer has finished, the root login prompt will show. |
| 5. | System login prompt will display the system's current IP ADDRESS. Please login into setup wizard with http://$IPADDRESS (For Example: http://192.168.1.2) |
IMPORTANT:
| • | Setup wizard has security username/password in order to prevent unauthorized access. Defaults are: username: root , password: pbxware . Setup wizard will ask for the password to be changed in one of the setup steps. After it is changed, It is very important to remember this password since it is system root and setup wizard password. |
| • | Before continuing please read system requirements. |