Important Safeguard

For your safety, please read all the instructions regarding officeBOX appliance.

  1. Safety precautions

    For your protection when setting up the equipment, observe:

    • All cautions and instructions marked on the equipment should be followed

    • Make sure that your power source voltage and frequency matches the one required by your equipment

    • Never insert objects through openings on the equipment. This can be dangerous and can damage the equipment.

  2. Symbols

    Following symbols may appear in this guide:

    [Important]

    Caution sign: There is a risk of injury and damage to the equipment.
    [Warning]

    Warning sign: Hazardous voltages are present. To reduce the risk of electrical shock follow the instructions.
    [Tip]

    Tip sign: Useful suggestions or tips that can help you in the setup procedure.

  3. Power source and power cords

    Make sure that your power source voltage and frequency matches the one required by your equipment.

    [Warning]

    officeBOX is designed to work with single-phase power systems. To reduce the risk of electrical shock, do not plug the equipment into any other power system. If you are not sure what kind of power system your facility has, contact the facility manager or a qualified electrician.
    [Warning]

    Your officeBOX power supply is shipped with a grounded type power cord, so to reduce the risk of electrical shock, always plug the cord into a grounded power outlet.
    [Warning]

    Not all power cords have the same current ratings, and not all power cords fit your officeBOX power supply. Thus the usage of other power cords is not recommended.

  4. Electrical Shock

    To reduce the risk of electrical shock, do not disassemble or tamper in any way with the power supply. Opening the power supply may expose you to dangerous voltage, and incorrect reassembly will damage your equipment

  5. Top cover

    In order to add cards or internal storage, first you must remove the top cover. Make sure to place the top cover back before turning on the appliance.

    [Important]

    Do not work with the officeBOX without its top cover in place. Failing to do so may cause injury and equipment damage.

  6. Equipment modifications

    Do not make any hardware modifications to the equipment. Bicom Systems is not responsible for any damage or injury as a result of the equipment modification.

  7. Ventillation

    Although officeBOX does not use active cooling, it will not overheat within defined room temperatures. Nevertheless, good ventillation space is required for the proper working of the appliance. Openings on the appliance must not be covered or blocked and should be kept free from dust.

  8. Placement

    Openings on the top cover are meant as a ventillation of any small amount of exccess heat that is not transfered to the side aluminium cooler, and they should be free. That means that you should place the appliance in a well vented place.

    [Important]

    Do not put the appliance near a radiator or any other heat emmiting device. Doing so can cause your appliance to overheat and malfunction.

  9. Regulations and information

    This device complies with the CE and FCC Rules and Regulations which can be obtained from the supplier