Interface

• Power supply: PoE and/or 12V ±15 % / 2A DC
• PoE: PoE 802.3af (Class 0–12.95 W)
• LAN: 10/100BASE-TX with Auto-MDIX, RJ-45, connecting block or pigtail RJ-45
• Recommended cabling: Cat-5e or higher
• Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
• Passive switch: NO and NC contact, up to 30V/1A AC/DC
• Active switch output: 8 to 12V DC according to power supply (adapter: source voltage minus 2 V; PoE: 10V), up to 550 mA
• Inputs: 3 inputs in passive / active mode (-30V to +30V DC) OFF = open or Uin> 1.5V, ON = short-circuit or Uin< 1.5V
• Tamper switch is a native part of the 2N® Access Unit
• Speaker: 0.8W / 8Ω

Touch Keypad

• Capacitive technology
• High sensitivity of the touch layer (0.1pF)
• Regular automatic calibration (SmartSense Auto-tuning)
• Water tolerance (no false touches on a damp surface)
• Adjustable brightness of back-lighting
• Status signalisation using multi-coloured LED diodes
• Operating temperature range: -20 to 55 ºC

Mechanical properties

• Cover: Robust zinc cast with surface finish
• Operating temperature: -20 °C to 55 °C
• Operating relative humidity: 10 % – 95 % (non-condensing)
• Storage temperature: -20 °C to 60 °C
• Dimensions (1-module solution): Wall (surface) mounting frame: 107 (W) x 130 (H) x 28 (D) mm, Flush mounting frame: 130 (W) x 153 (H) x 5 (D) mm, Flush mounting box (minimum hole): 108 (W) x 131 (H) x 45 (D) mm
• Weight: Max weight: 0.8 kg
• Cover rating: IP54, IK08