CyberData VoIP Paging Amplifier (010965)

Please note that the VoIP Paging Amplifier has been replaced by the V2 VoIP Paging Amplifier

The CyberData SIP-enabled VoIP Paging Amplifier provides an easy method for implementing an IP-based overhead paging system for both new and legacy installations.

The Amplifier provides direct drive of a standard Horn speaker and supports a line out connector for connection to an external amplifier. The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. For non-SIP environments, the Paging Amplifier can be configured to listen to multicast address and port number combinations to form paging zones.

The Amplifier provides direct drive of a standard Horn speaker and supports a line out connector for connection to an external amplifier. The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. For non-SIP environments, the Paging Amplifier can be configured to listen to multicast address and port number combinations to form paging zones.

Features

• SIP (RFC 3261) compatible
• Dual-speed ethernet 10/100 Mbps
• Web-based configuration
• Web-based firmware upgradeable
• PoE 802.3af enabled
• IGMP
• Line-out connector
• Direct speaker drive

VoIP Loudspeaker Amplifier Specifications

• Ethernet I/F 10/100 Mbps
• Power Input PoE 802.3af or 110-230VAC PS
• Protocol SIP RFC 3261
• Payload Types G711
• Regulatory Compliance FCC Class B, UL 60950, CE
• Warranty 2 Years Limited
• Dimensions 1.26” x 9.45” x 3.13”
• Part Number 010965
• Output    
  - With one 8-ohm speaker, up to 8 watts output
  - With external PoE power injector (Part #010867) and one 8 ohm speaker,    up to 10 watts output.
  - With external PoE power injector (Part #010867) and two 8 ohm speakers in parallel, up to 20 watts output.

Specifications Tab

Questions Tab